Titan Arm 2 Ti (London Fog)
Description
Never settle for less. With the Titan Arm 2 Ti, we’ve upgraded our bestselling friction arm to give filmmakers the best value. Whether you’re a gaffer adding a light fixture or a solo shooter needing an onboard B-camera, the Titan Arm 2 Ti is ready for anything.
Backwards-compatible with Titan Arm 2 components, the new arm doubles the functionality without doubling the price.
- Bigger Payloads – The Titan Arm’s titanium-reinforced design is stronger than ever.
- Better Rigging – New Adaptors expand options for mounting lights, cameras and more.
- Easy Upgrading – Alternatively, use your original Titan Arm 2 adaptors for a clean switch.
- No Breaks – The Titan Arm 2 Ti is built like a tank: with a friction-based design that will never break or wear down.
- Cleaner Release – The improved locking lever keeps the arm secure when you need it, but loose when you don’t.
Putting the “Titan” in “Titanium”, our all-new Titan Arm 2 Ti is the stronger successor to our bestselling friction arm. Capable of holding a truly ridiculous range of rigging gear, the new Titan Arm is stronger and more versatile, without compromising on anything that made the original a bestseller. With a strength capacity of up to 8kg, the titanium-reinforced arm can mount anything from kitted-out B-cameras to full-size LED lights.
If you’re swapping out your original Titan Arm 2 for some extra muscle, then the Titan Arm 2 Ti is compatible with existing adaptors for a clean upgrade.
Strength of a Titan
If you’re a filmmaker whose chemistry knowledge ends at Breaking Bad, the “Ti” of our new Titan Arm refers to titanium: one of the strongest and lightest materials on earth. This means that the Titan Arm 2 Ti only weighs a few ounces more than its predecessor, whilst allowing you to pack on the pounds.
Stronger than Strong
Speaking of, we’ve almost doubled the strength of the Titan Arm 2, with a payload capacity going from 5kg to 8kg. This means that you have even more freedom to customise your camera: from bulkier monitors with more powerful batteries through to entire camera systems. Whether you need it or not, the Titan Arm 2 Ti’s reinforced pistons can hold up rigs without breaking a sweat.
No Slack
Like with the original Titan Arm 2, the Titan Arm 2 Ti is designed to never move unless you move it – whether fully unlocked or secured in place, you decide when it moves. You can reposition the arm even when the mechanism is fully locked. And on the other end of the spectrum, the Arm has enough internal strength to stay steady – even with the lever unlocked.
Expanded Rigging
Has a client asked for everything under the sun – “16:9, 9:16, BTS, sound, lighting” – from your solo-shooter operation? No problem: the Titan Arm 2 Ti’s expanded range of Adaptors, coupled with the high-strength versatility, is a match made in heaven. The new adaptors can mount large light systems, B-cameras, external microphones and much more; so that your rig is ready no matter the brief.
No Waste
Ironically enough, the Titan Arm 2 Ti doesn’t cost an arm and a leg. We’ve designed it to offer the best value for money, with no compromises on materials or engineering. If you’re coming from the original Titan Arm 2, the Ti is only a handful of dollars more – and you can use the same adaptors to avoid throwing anything away.
Designed for Good
The Titan Arm 2 Ti isn’t just built to last, it’s built to be the last. The mechanism will be as strong today as in ten years’ time; and the high-grade build of titanium, aluminium and stainless steel can withstand even the worst set conditions. Long after your camera has upgraded and your other gear has degraded, the Titan Arm 2 Ti will be working like new.
Part of the Titan Arm 2 System
More than just a monitor arm: the Titan Arm 2 Ti is the next-generation upgrade to our bestselling rigging arm. Stronger and more versatile, the new arm is built to last and versatile enough to suit any shooting scenario. Redefine your rig today.
The Titan Arm 2 Ti comes as a standalone unit, but requires two compatible adaptors and a 2.5mm Hex Key to install it.
Adaptor to Titan Arm
1. Align the base of the Adaptor with the ball-and-socket joint of the Titan Arm. Lower it into place so that the countersunk M4 screw threads are aligned.
2. Insert the M4 screw through the Adaptor and use a 2.5mm Hex Key to secure it in place.
The Titan Arm 2 Ti is compatible with any camera rig, but requires dedicated adaptors in order to work. Users are recommended to purchase one of our pre-made kits, but if you are upgrading from the Titan Arm 2 then your previous adaptors are backwards-compatible.
From our UK base, we manufacture camera accessories to the highest standards of quality and sustainability. All products are designed and engineered rigorously, to maximise their usefulness to professional filmmakers. If you encounter any issues with our products, our customer service team is on-hand to help you however you may need.
| Weight | 0.503 kg |
|---|---|
| Dimensions | 8 x 3 x 15.5 cm |
| Camera brand | Universal |
| Camera model | Universal |
| Colour | London Fog |
| Range | Titan Arm 2 |