B3000.0037
$195.00
Skip to product information
Description
Stronger than strong: the Titan Arm 2 Ti (3/8” AT – 1/4″ AT) is the ultimate upgrade for your rig. Featuring an unbreakable titanium-reinforced mechanism, the Titan Arm is guaranteed to withstand the most demanding shot lists and the most careless ACs.
Whether you’re a solo shooter or part of a camera team, secure your shoot with the Titan Arm 2 Ti.
- No Slack – The new titanium mechanism makes the Titan Arm 2 Ti even stronger, and guaranteed to never fail.
- Even Stronger – Mount entire secondary rigs with the Titan Arm’s improved 8kg payload.
- Tool-Free – Quickly attach or detach the Titan Arm 2 Ti via the dual anti-twist thumbscrews.
- Interchangeable – Easily swap out the Titan Arm’s mounts for alternative Adaptors; with additional Baby Pin and NATO mounts available for either end.
- Cleaner Release – The improved locking lever keeps the arm secure when you need it, but loose when you don’t.
What's Included:
After hours of rough treatment, over-straining and old-fashioned carelessness; your average camera arm will wear down. But the Titan Arm 2 Ti is not your average camera arm. The new titanium pistons give you even more strength and functionality without breaking the budget – and is guaranteed to last long after you’ve wrapped.
Coming in Tangerine orange, expand what’s possible with the Titan Arm 2 Ti today.
Strength of a Titan
If you’re a filmmaker whose chemistry knowledge ends at Breaking Bad, the “Ti” of our new Titan Arm refers to titanium: one of the strongest and lightest materials on earth. This means that the Titan Arm 2 Ti only weighs a few ounces more than its predecessor, whilst allowing you to pack on the pounds.
No Breakdowns
Speaking of, we’ve almost doubled the strength of the Titan Arm 2, with a payload capacity going from 5kg to 8kg. This means that you have even more freedom to customise your camera: from bulkier monitors with more powerful batteries through to entire camera systems. Whether you need it or not, the Titan Arm 2 Ti’s reinforced pistons can hold up whole rigs without breaking a sweat.
Self-Supporting
In those high-pressure moments on set, it can be frustrating having to unlock and re-lock a traditional monitor arm. With the Titan Arm 2 Ti, the arm moves when you want it to, and stays still when you don’t. You can reposition the arm, even when the mechanism is fully locked. And on the other end of the spectrum, the Arm has enough internal strength to stay steady – even with the lever unlocked.
Tool-Free Tweaking
For on-the-fly adjustment and quick pack-downs, the 1/4" and 3/8” adaptors are designed with anti-twist thumbscrews. Minimise the downtime by quickly releasing and attaching whatever you need to the Titan Arm – your 1st AD will thank you for it.
Ideal for Monitors
The 1/4″ Adaptor comes with removeable locating pins that help you mount different monitor standards; including Atomos, SmallHD and ARRI. If you don’t need them, they can be stowed inside the head of the Titan Arm – with each pin having a marked niche.
Adaptable
And if 3/8” or 1/4" aren’t what the call sheet calls for, you can replace them. Both ends of the Titan Arm can be removed, meaning that you can swap either end over, trade them for a NATO Adaptor for quick-release convenience or even add lighting with our Baby Pin Adaptors. It takes moments to rearrange your rig, making the Titan Arm 2 ideal for on-the-fly adjustments to your setup. The dual ball-and-socket joints give you full freedom of positioning: so the arm can be mounted from any angle to almost any surface.
Designed for Good
The Titan Arm 2 Ti isn’t just built to last, it’s built to be the last. The mechanism will be as strong today as in ten years’ time; and the high-grade build of titanium, aluminium and stainless steel can withstand even the worst set conditions. Long after your camera has upgraded and your other gear has degraded, the Titan Arm 2 Ti will be working like new.
Part of the Titan Arm 2 System
More than just a monitor arm: the Titan Arm 2 Ti is the next-generation upgrade to our bestselling rigging arm. Stronger and more versatile, the new arm is built to last and versatile enough to suit any shooting scenario. Redefine your rig today.
The Titan Arm 2 Ti comes as a standalone unit, but requires two compatible adaptors and a 2.5mm Hex Key to install it.
Adaptor to Titan Arm
1. Align the base of the Adaptor with the ball-and-socket joint of the Titan Arm. Lower it into place so that the countersunk M4 screw threads are aligned.
2. Insert the M4 screw through the Adaptor and use a 2.5mm Hex Key to secure it in place.
The Titan Arm 2 is fully compatible with any camera and monitor system, and can be mounted via any industry-standard 1/4″ and 3/8” thread. The monitor mount end of the Titan Arm has marked locating pins for compatibility with Atomos, ARRI and SmallHD monitor standards, with pins that can be removed depending on which monitor is being used. Adaptors can be removed and swapped out for alternatives such as a NATO clamp or 5/8” Baby Pin Adaptors for lighting.
Developed and tested in the UK, Bright Tangerine products are made to the highest standard; and support productions across the globe. Each product is built with sustainability as the core consideration, which in turn means that products are both long-lasting and high-quality. Our customer service team can assist you, with plenty of resources and support to help you make the most of our products.
| Weight | 0.611 kg |
|---|---|
| Dimensions | 8 x 4 x 16 cm |
| Camera brand | Universal |
| Camera model | Universal |
| Colour | Tangerine |
| Mount | 3/8" + 1/4" |
| Range | Titan Arm 2 |
| Thread size | 1/4" (M)|3/8" (M) |