Take a load off with the Lens Adaptor Support for Universal Dovetail. Packaged here in a kit to suit a range of cameras and lens supports – from Metabones to Mofage. Mount the Support Bracket in the central channel of the Universal Dovetail, then thread through one of the three compatible posts until your lens mount is balanced – and you still have full access to the Dovetail’s mounting system.

Low-profile but high-value, check out the Lens Adaptor Support for Universal Dovetail today.

Strong Support

Heavy lenses can damage both your camera and lens mount. So if you feel like your camera rig is starting to slouch, the Lens Adaptor Support can strengthen the build. Slot it into the centre of your UDS, screw in the corresponding support post, and rest easy – at least until the next lens swap.

Built to Last

Cameras and lenses come and go, but the Lens Adaptor support will keep them all safely secured. Made from our signature anodised aluminium, the Lens Adaptor Support will offer long-lasting protection for years to come – being totally resistant to all the wear-and-tear or corrosion your shoots can throw at it.

Part of the Universal Dovetail System

Bright Tangerine’s Universal Dovetail System (UDS) is the ultimate time-saving baseplate solution. Mount to tripods and gimbals in seconds, and supplement your setup with a range of rod brackets, lens supports and much more.

The Lens Adaptor Support for Universal Dovetail comes with the required screw. You will require one of the three included Support Posts as well as a 2.5mm Hex Key and a flathead screwdriver in order to install it.
Adaptor Bracket to Universal Dovetail
1. Unscrew the 1/4" screw from the Bracket, and insert the Bracket through the bottom of the Universal Dovetail’s central channel.
2. Insert the screw through the top of the Universal Dovetail’s channel and use a flathead screwdriver to secure it in place – leave it slightly loose to correctly position the Bracket below the lens adaptor.
Adaptor Post to Bracket
1. Insert the correct Post through the bottom of the Bracket, turning it clockwise to screw into the lens adaptor.
2. Use a 2.5mm Hex Key to tighten the Bracket’s mechanism and secure the two components.

Bright Tangerine offers accessories for film sets where every second counts. When you choose a Bright Tangerine product, you can be confident that it is built to last: with each component boasting enhanced durability and versatility.

24 months

Dimensions	0 x 0 x 0 cm