Take your camera to new heights with our LeftField Mini DJI Kit for a range of cameras: including the Canon C80, C400 and the Blackmagic PYXIS. The combination of our Open•UP Baseplate and Riser sets your system to the correct height for DJI gimbals, along with providing quick-release convenience from ARRI standard dovetails.

Quick-Release Convenience

Though the LeftField Mini is more compact than LeftField 3 Baseplates, it still features our popular Open•UP system for quick-release convenience. This allows you to seamlessly attach the LeftField Mini Baseplate onto any standard ARRI dovetail in moments. When in place, use the lever on the side to transition between locked, sliding and unlocked on the dovetail.

Designed for DJI

The featured Riser is designed to be used with DJI RS gimbals and dovetail plates, providing the necessary height clearance from the camera’s optical centre. Dovetails are front-loaded into the Riser, offering sliding travel, before being locked in place with the ratcheting lever clamp.

Clean Installation

The Canon Riser comes in three distinct parts: left, middle and right. Each is labelled to avoid confusion and ensure correct directional placement. All three mount via M4 screws, meaning it just takes a standard 3mm Hex Key to install.

Part of the LeftField System

The LeftField system of quick-release baseplates are the most convenient mounting option for professional filmmakers. Our patented Open•UP system allows you to cleanly mount your camera rig to any ARRI standard dovetail in moments, and release it just as quickly.

The LeftField Mini DJI Kit comes with all required parts and screws. You will require a 3mm Hex Key to install it.

Left

1. Align the Riser’s mounting holes with the two M4 threads on the outer edge of the LeftField Mini Baseplate – on the same side as the release clamp.

2. Use a 3mm Hex Key to tightly screw the M4 threads through the Riser and the Baseplate.

Middle

1. Align the profile of the middle part of the Riser, aligning the M4 screw threads and ensuring that the Riser plate is centred.

2. Use a 3mm Hex Key to tightly screw the M4 threads through the Riser and the Baseplate.

Right

1. Line up the orange safety stop with the corresponding port on the LeftField Mini Baseplate, sliding it in until the M4 screw threads are aligned.

2. Use a 3mm Hex Key to tightly screw the M4 threads through the Riser and the Baseplate.

Dovetail to Riser

1. Slide the dovetail plate in through the front of the baseplate, until it is optimally aligned and balanced. Dovetails can only be loaded from the front.

2. When in place, use the ratcheting lever clamp to secure the Riser.

The LeftField Mini DJI Kit (63-65mm) is compatible with the following cameras:

Blackmagic PYXIS

Canon C70

Canon C80

Canon C200

Canon C300 Mk III

Canon C400

Canon C500 Mk II

Canon C700

From our UK base, we manufacture camera accessories to the highest standards of quality and sustainability. All products are designed and engineered rigorously, to maximise their usefulness to professional filmmakers. If you encounter any issues with our products, our customer service team is on-hand to help you however you may need.