KipperTie Revolva/Adapta RF Support for RED KOMODO

B4002.1020
B4002.1020
$113.00
In Stock | Selling Fast
Skip to product information
KipperTie Revolva/Adapta RF Support for RED KOMODO
KipperTie Revolva/Adapta RF Support for RED KOMODO

Description

Secure your Kippertie Revolva or Adapta RF/PL or RF/EF mount adapters onto your RED KOMODO®, removing any flex or play in the mount.

The support uses a 4-point harness and requires the LeftField side & top plates.

  • Contoured design to specifically fit the Kippertie Revolva RF/PL, Revolva RF/EF, Adapta RF/PL or Adapter RF/EF
  • Maintains full access to Revolva filter cartridges
  • Completely locks off and removes any flex & wiggle from the camera to the adapter
  • Prevents micro movements in all axis which can affect focus calibration
  • 4-point harness - mounts to LeftField side rails, top rail & the adapter
  • Simple to install and remove when swapping mounts & adapters
  • Interchangeable with other LeftField Adapter Supports for the RED KOMODO
    • Selling Fast

    This adaptor is custom made for the Kippertie Revolva (RF/PL or RF/EF) or Adapta (RF/PL or RF/EF) for use with the RED KOMODO®. Providing a completely rigid mount, it's interchangeable with all other LeftField Adapter Supports for the RED KOMODO.

    Rigid support in any situation.
    Securing your adapter is vital to eliminate movement which can cause issues with back focus, lens calibration and shim configuration. The LeftField Adapter Supports create a 4-point harness by connecting to the adapter which is then secured to both the left, right and top rails anchored to the camera. This secures the adapter against forces in any axis of movement.

    What you'll need:
    It requires the LeftField Side Plate Kit (B4002.0015) & Top Rail (B4002.1007) or Run/Stop Top Rail.

    Unlike other mount support systems, the LeftField Adapter supports don’t require the baseplate to be attached, so it can be used on minimal camera builds for handheld, aerial and gimbal work. When using larger lenses, we still recommend using a lens support, such as rods, to remove any flex from the lens to the mount.

    The support comes included with five M3x10mm screws for attachment. You will require a 2.5mm Hex Allen key.
    24 months
    Weight 0.102 kg
    Dimensions 11.5 x 10.2 x 1.6 cm