HDMI Clamp for Canon C70 and C80
B4005.1124
B4005.1124
Regular price
$60.00
Sale price
$47.00
22% off
Skip to product information
Description
The HDMI Clamp for Canon C70 and C80 holds HDMI cables in place when attached to the Canon C70 or C80. It is adjustable to match different cable shapes and sizes and is rated to withstand over 30kg of force.
With an anti-twist design made from anodised aluminium, the HDMI Clamp is lightweight yet high-strength.
- Secure – The HDMI Clamp helps ensure a stable hold on your cables.
- Canon Compatible – The Clamp works with both the Canon C70 and C80.
- High Strength Capacity – The HDMI Clamp is resistant to more than 30kg of force.
- Adjustable – Different plug sizes up to can be made to fit the HDMI Clamp.
- Tool-Free Adjustment – Align the Clamp for optimum cable positioning.
The HDMI Clamp for Canon C70 and C80 comes with the required screws and components, but requires a flathead screwdriver and 3mm Hex Key in order to install.
Clamp to Side Plate or Side Rib
1. Align the HDMI Clamp screw with the marked channel on the C70 Side Plate or C80 Side Rib.
2. Use a 3mm Hex Key to install the mounting screw – leaving it slightly loose for fine-tuned adjustment.
Cable to Clamp
1. Install the HDMI Cable whilst the Clamp is loose – it is important to do this before tightening.
2. Slide the HDMI Clamp until it is aligned correctly with the plug.
3. Secure the Clamp in place with the 3mm Hex Key.
4. Use the thumbscrew to tighten the clamp into position – or get extra torque with a flathead screwdriver.
Clamp to Side Plate or Side Rib
1. Align the HDMI Clamp screw with the marked channel on the C70 Side Plate or C80 Side Rib.
2. Use a 3mm Hex Key to install the mounting screw – leaving it slightly loose for fine-tuned adjustment.
Cable to Clamp
1. Install the HDMI Cable whilst the Clamp is loose – it is important to do this before tightening.
2. Slide the HDMI Clamp until it is aligned correctly with the plug.
3. Secure the Clamp in place with the 3mm Hex Key.
4. Use the thumbscrew to tighten the clamp into position – or get extra torque with a flathead screwdriver.
The HDMI Clamp can be used with any HDMI cable. It is compatible with both the Canon C70 and C80, mounting via their respective Side Ribs.
From the heart of the UK, Bright Tangerine creates camera accessories to the utmost standards of quality. From Hollywood blockbusters to short-form content creation, our products are trusted by filmmakers around the world. Our dedicated customer service team can assist and advise on any purchases, and help you make the most out of your camera.
| Weight | 0.02 kg |
|---|---|
| Dimensions | 6.9 x 1.3 x 3.5 cm |
| Camera brand | Canon |
| Camera model | Canon C80 |