Turn your B-Camera into an A-Camera with our Canon C50 Left Side Plate: which gives you the rigging options of a full-fledged camera setup with the C50’s minimal footprint. Featuring a NATO rail for quick-release as well as bolt-on mounting points, you have plenty of choices for customising.

With space for cable management and tilting your screen, the Left Side Plate is ideal for complex rigging.

Quick-Release Convenience

With a NATO rail running the length of the Side Plate, you’ve got easy access to quick-release rigging options. This simple design lets you mount compatible NATO clamps, such as our Universal Monitor Hinge for a secure external display. Don’t worry about gear slipping off: a safety stop at either end means that everything is secure when you’re shooting, but still detached at the push of a button come wrap time.

Rigging Real-Estate

Along with the NATO rail, you have a range of bolt-on screw threads for simpler rig building. A selection of 1/4" and 3/8” rigging points on the front, side and back give you side-mounting freedom for your rig. Each one comes with anti-twist threads: ensuring that your gear won’t move unexpectedly. You’ve also got a line of MAP M4 points, as well as an extra thread for mounting camera straps.

Compact Clearance

A lot of cages for compact cameras trade customisation options for easy access to the camera functions themselves. We’ve struck a balance between the two: with space between the C50 body and the main part of the Side Plate. This gives you space to access the various inputs on the C50, or use lens adaptors that feature drop-in filter slots like on the MOFAGE POCO.

Cable Management

If you’ve ever felt the frustration of a phone charger that only works at a specific angle, then avoid supersizing that feeling with your C50’s cables. Combine the Side Plate with our USB-C or HDMI Clamps to secure your inputs in place – no more loss-of-signal for your monitors.

Part of the Canon C50 System

Build a rig that can fit in your pocket with the Bright Tangerine Canon C50 range: with an array of carefully designed and convenient mounting options.

The Canon C50 Left Side Plate comes with all required components and screws. You will require the Canon C50 Bottom Plate to be installed to the camera already, along with a 3mm and 4mm Hex Key.

Side Plate to Camera

1. Align the screw on the bottom of the Side Plate with the thread on the left-hand side of the Bottom Plate – the writing on the Side Plate should be facing upwards.

2. Use a 3mm Hex Key to secure the Side Plate in place.

3. Align the top screw with the thread on the top-left of the C50 – just below the camera strap mount.

HDMI Clamp to Side Plate

1. Align the screw thread of the HDMI Clamp with the marked gap on the Side Plate and use a 3mm Hex Key to loosely mount the Clamp in place.

2. Insert your HDMI cable and align the Clamp so that the flat base of the cable is flush with the Clamp.

3. Use the 3mm Hex Key to fully tighten the Clamp to the Side Plate.

4. Secure the HDMI cable in place by tightening the thumbscrew.

USB-C Clamp to Side Plate

1. Align the M4 screw with the second or third-furthest thread to the right on the top of the Side Plate – the Clamp should sit loosely aligned with the USB-C input.

2. Use a 3mm Hex Key to loosely install the Clamp.

3. Insert the USB-C cable and position so that the base of the cable is flush with the Clamp.

4. Use the thumbscrew to tighten the USB-C Clamp into its final position.

The Canon C50 Left Side Plate is designed to be compatible with the Canon C50 alone, with a dedicated shape and mounting points for that camera. It requires the Canon C50 Bottom Plate to be attached for a full and secure installation. It also features dedicated mounting for our HDMI Clamp and USB-C Clamp, also purpose-built for the C50.

The Left Side Plate is spaced to allow extra clearance for lens accessories, such as adaptors with drop-in filters such as the MOFAGE POCO. The Side Plate also allows room for the Canon LCD screen to be fully articulated – however, please note that with the HDMI or USB-C Clamp installed, this is limited to a 30-degree tilt window.

From our UK base, we manufacture camera accessories to the highest standards of quality and sustainability. All products are designed and engineered rigorously, to maximise their usefulness to professional filmmakers. If you encounter any issues with our products, our customer service team is on-hand to help you however you may need

Weight	0.056 kg
Dimensions	4.8 x 3.5 x 8.7 cm