OpenRig™ Lens Adaptor Support
B4013.1051
B4013.1051
$25.00
Available to Backorder
Skip to product information
Supported Shooting – Strengthen your rig with the Lens Adaptor Support system.
Room to Grow – The Lens Adaptor Support can slide up-and-down without colliding with the OpenRig™ Rail.
Secure PL-acement – The Adaptor Support can be used with a range of PL Lens Adaptors including the Mofage POCO, Wooden Camera and Metabones.
Description
Take a weight off with the OpenRig™ Lens Adaptor, which adds support for bulky lenses and adaptors. Bolt it into your Arca Base for rock-solid support for your primes, and protection for your camera.
Heavy lenses can damage both your camera and lens mount. So if you feel like your camera rig is starting to slouch, the Lens Adaptor Support can strengthen the build. Slot it into your Arca Base, screw in the corresponding support post, and rest easy – at least until the next lens swap.
Brace Yourselves
When you’re using a PL prime or a hefty zoom, all of the weight gets concentrated on your lens mount – one of the most precious parts of your rig. With the Lens Adaptor Support, you can shift the strain onto something stronger: your cage.
Open Rigging
The Lens Adaptor Support slots into the marked grooves on your Arca Base or any other OpenRig™ Riser, and can then be fitted with a height-adjustable support post (sold separately). The added height of the OpenRig™ system means that it is even easier to rig up: easily compatible with Mofage, Wooden Camera and Metabones mount adaptors.
Part of the OpenRig™ System
Make rigging easier. With the OpenRig™ system from Bright Tangerine, you can learn one system, once – but have endless possibilities. Whether you need a run-and-gun rig for a documentary or a full cine build, the OpenRig™ system has the solution.
The OpenRig™ Lens Adaptor Support comes with all required components and screws for mounting. You will require the Arca Base, as well as a 2.5mm Hex Key, to install.
Support to Arca Base
1. Slide the Support bracket into the marked grooves on the Arca Base, roughly positioned to match the front of your camera.
2. Use a 2.5mm Hex Key to secure the Support in place.
Post to Support
1. Use a 2.5mm Hex Key to loosen the rod clamp.
2. Slot in a Lens Adaptor Support Post and re-tighten the clamp.
Support to Arca Base
1. Slide the Support bracket into the marked grooves on the Arca Base, roughly positioned to match the front of your camera.
2. Use a 2.5mm Hex Key to secure the Support in place.
Post to Support
1. Use a 2.5mm Hex Key to loosen the rod clamp.
2. Slot in a Lens Adaptor Support Post and re-tighten the clamp.
From our UK base, we manufacture camera accessories to the highest standards of quality and sustainability. All products are designed and engineered rigorously, to maximise their usefulness to professional filmmakers. If you encounter any issues with our products, our customer service team is on-hand to help you however you may need.
24 months
| Weight | 0.029 kg |
|---|---|
| Dimensions | 3 x 4.1 x 1.5 cm |