Search Results for:
Titan Arm 2 (3/8″ – 1/4″) – Tangerine
$145
With the Titan Arm 2, we’ve created a monitor arm that’s built to last a lifetime. Thanks to a unique self-supporting design, the Titan Arm is able to hold its position even when fully unlocked – and that’ll only change if you want to adjust it.
With a 3/8” screw at one end and a 1/4″ at the other, the Titan Arm 2 can hold up monitors, lights or even small cameras.
- The Arm That Won’t Fail – The Titan Arm 2 features a unique mechanism that won’t lose strength over time, ever.
- Self-Supporting – Even with the mechanism locked, you can still reposition the monitor and the Titan Arm without any risk of breaking it.
- Interchangeable – Easily swap out the Titan Arm’s mounts for alternative Adaptors; with 1/4″, NATO and 3/8” mounts available for either end.
- Strength of a Titan – The Titan Arm 2 can hold 5kg of weight, and is fully self-supporting even with the Arm unlocked.
Description
More than just a monitor arm: the Titan Arm 2 offers new freedom for mounting accessories: from monitors and microphones to lights or even small cameras. The Arm has a patented system for retaining strength and stability – even when fully unlocked. The Titan Arm has a strength capacity of 5kg from its interchangeable mounting points: with multiple Adaptor options available.
Built from top-quality stainless steel and anodised aluminium, the Titan Arm 2 is built to withstand the toughest of shoots.
No Slack
The Titan Arm 2 features a unique friction-based system, which shifts the pressure on the mechanism to different positions as the arm pivots. This means that the mechanism won’t strip out or wear down over time. The Titan Arm 2 is guaranteed to last.
Self-Supporting
In those high-pressure moments on set, it can be frustrating having to unlock and re-lock a traditional monitor arm. With the Titan Arm 2, you can reposition the arm even when the mechanism is fully locked. And on the other end of the spectrum, the Arm has enough internal strength to stay steady – even with the lever unlocked.
Strength of a Titan
Using our patented design, the Titan Arm 2 is stronger than ever: bearing a load of 5kg without breaking a sweat. The dual ball-and-socket joints give you full freedom of positioning: so the arm can be mounted from any angle to almost any surface.
Essential Mounting Options
This Titan Arm 2 Kit features a 1/4″ and 3/8” screw, both of which can be exchanged for either end of the Titan Arm. These industry-standard mounting screws give you the freedom to use the Titan Arm however you need. Mount a monitor to a larger cinema camera, or mount a whole compact camera to a plate or cage – the possibilities are endless.
Please note that the included Adaptors do not feature anti-twist pins or a thumbscrew design. These can be found in the 3/8” AT-1/4” AT Kit.
Interchangeable Ends
The Titan Arm 2 features interchangeable mounts at either end: with 1/4”, 3/8” and NATO quick-release options available. This gives you full freedom for creating the perfect setup. Mount to a sturdy 3/8” thread on your Top Plate, or quickly swap in different accessories via different NATO rails.
Built to Last
The Titan Arm 2 is built from high-grade anodised aluminium and stainless steel, for the ultimate balance of strength and durability. You can comfortably hold and reposition the arm at any time thanks to a patented mechanism. For particularly dirty, dusty or rusty locations; the Titan Arm 2 is internally sealed for added protection.
The Titan Arm 2 Range
Level up your setup with the Bright Tangerine Titan Arm 2, which offers new freedom for mounting monitors or any other accessories. The Arm has a load capacity of 5kg and a patented system for retaining strength. No matter your setup, the Titan Arm 2 can accommodate thanks to its interchangeable mounting system.
Instructions/Assembly
Adaptor to Thread
1. Align the 1/4″ or 3/8” screw with a compatible screw thread on a camera plate, monitor or other mount.
2. Twist the Adaptor into place.
Adaptor to Titan Arm
1. Align the base of the Adaptor with the ball-and-socket joint of the Titan Arm. Lower it into place so that the countersunk M4 screw threads are aligned.
2. Insert the M4 screw through the Adaptor and use a 2.5mm Hex Key to secure it in place.
Compatibility
The Titan Arm 2 uses a unique friction-based system which allows it to be moved even when locked. This means that it has less slack than other monitor arms, and may feel stiff when used – but that is the arm performing as intended.
To avoid issues, store the Titan Arm 2 with the mechanism unlocked.
If you find that the Titan Arm 2 is impossible to move, even with force, contact our Customer Service team here.
The Titan Arm 2 (3/8”-1/4”) Kit is compatible with any industry-standard 1/4″ or 3/8” screw; allowing the arm to be mounted to and from almost any type of surface including cameras, dovetails and cheese plates. The Adaptors can also be exchanged with 1/4″ or 3/8” thumbscrews or a NATO clamp, for enhanced convenience.
The Titan Arm 2 cannot be used with Titan Arm 1 accessories, and cannot be used without the Adaptors.
Zero Compromises
Based in the heart of the UK, Bright Tangerine is a company filled with industry experts in design, engineering and – of course – filmmaking. Products are researched and developed extensively across multiple departments, with the goal of being long-term problem-solving products for professionals. Our customer support team is on-hand to advise and help, in the unlikely event that you encounter an issue with any of our goods or services.
Warranty
24 months
Additional information
| Weight | 0.500 kg |
|---|---|
| Dimensions | 10 × 5 × 17 cm |
| Camera Brand | |
| Camera Model | |
| Colour | Tangerine |
| Range | |
| Mount | 3/8" + 1/4" |
