{"title":"Risers \u0026amp; Receivers","description":"\u003cp\u003eOptimise your camera for different baseplates and shooting scenarios with these Riser Adaptor Blocks, perfect for adjusting a range of rigs.\u003c\/p\u003e","products":[{"product_id":"sony-fx6-riser-for-15mm-baseplate","title":"Sony FX6 Riser for 15mm Baseplate","description":"","brand":"0","offers":[{"title":"Default Title","offer_id":56058203242822,"sku":"B4004.1004","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4004_1004-Sony-FX6-Riser_web.png?v=1772030133"},{"product_id":"canon-c70-standard-riser-for-15mm-baseplate","title":"Canon C70 Standard Riser for 15mm Baseplate","description":"","brand":"0","offers":[{"title":"Default Title","offer_id":56058211467590,"sku":"B4005.1025","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4005_1025-C70_Standard_Riser-01_web.png?v=1772893020"},{"product_id":"red-v-raptor-movi-pro-riser-for-15mm-baseplate","title":"RED V-RAPTOR (Movi Pro) Riser for 15mm Baseplate","description":"","brand":"0","offers":[{"title":"Default Title","offer_id":56058669007174,"sku":"B4002.1065","price":127.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4002_1065-RED-V-RAPTOR-Freefly-Movi-Riser-for-15mm-Baseplate.png?v=1772894593"},{"product_id":"standard-riser-for-red-v-raptor","title":"Standard Riser for RED V-RAPTOR","description":"","brand":"0","offers":[{"title":"Default Title","offer_id":56058784350534,"sku":"B4002.1069","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4002_1069-RED-V-RAPTOR-Standard-riser-for-15mm-Baseplate.png?v=1772894626"},{"product_id":"sony-fx6-portrait-adapter-15mm-lws-spacer","title":"Sony FX6 Portrait Adapter 15mm LWS Spacer","description":"","brand":"0","offers":[{"title":"Default Title","offer_id":56058941309254,"sku":"B4004.1019","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4004_1019-Sony-FX6-Portrait-Adapter-15mm-LWS-Spacer-01_web.png?v=1772896042"},{"product_id":"dji-rs-4-rs-3-correction-washer","title":"DJI RS 4 \u0026 RS 3 Correction Washer","description":"","brand":"0","offers":[{"title":"Default Title","offer_id":56058969358662,"sku":"B4003.1057","price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4003_1057-DJI_RS_4__RS_3_Correction_Washer_web.png?v=1772897155"},{"product_id":"canon-c400-standard-riser-for-15mm-lws-baseplates","title":"Canon C400 Standard Riser for 15mm LWS Baseplates","description":"","brand":"0","offers":[{"title":"Default Title","offer_id":56058982924614,"sku":"B4005.1035","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4005_1035-Canon-C400-Riser-for-15mm-LWS-Baseplates_00_web.png?v=1772897592"},{"product_id":"canon-c70-c80-riser-for-leftfield-mini","title":"Canon C70 \u0026 C80 Riser for LeftField Mini","description":"","brand":"0","offers":[{"title":"Default Title","offer_id":56058991247686,"sku":"B4005.1044","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4005_1044-Canon-C70-C80-Riser-for-LeftField-Mini_01_web.png?v=1772897803"},{"product_id":"leftfield-mini-standard-riser-73mm","title":"LeftField Mini Standard Riser (73mm)","description":"","brand":"0","offers":[{"title":"Default Title","offer_id":56058996982086,"sku":"B4003.1064","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4003_1064-LeftField-Mini-Standard-Riser-73mm_01_web.png?v=1772898391"},{"product_id":"dji-rs-receiver-for-leftfield-mini","title":"DJI RS Receiver for LeftField Mini","description":"","brand":"0","offers":[{"title":"Default Title","offer_id":56058999079238,"sku":"B4003.1071","price":73.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4003_1071-DJI-RS-Receiver-for-LeftField-Mini_02_web.png?v=1772898534"},{"product_id":"leftfield-mini-standard-riser-62-5mm","title":"LeftField Mini Standard Riser (62.5mm)","description":"","brand":"0","offers":[{"title":"Default Title","offer_id":56059000258886,"sku":"B4003.1070","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4003_1070-LeftField-Mini-Standard-Riser-62.5mm_01_web.png?v=1772898546"},{"product_id":"leftfield-mini-standard-riser-48mm","title":"LeftField Mini Standard Riser (48mm)","description":"","brand":"0","offers":[{"title":"Default Title","offer_id":56059000389958,"sku":"B4003.1065","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4003_1065-LeftField-Mini-Standard-Riser-48mm_01_web.png?v=1772898718"},{"product_id":"leftfield-mini-standard-riser-54mm","title":"LeftField Mini Standard Riser (54mm)","description":"","brand":"0","offers":[{"title":"Default Title","offer_id":56059000783174,"sku":"B4003.1066","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4003_1066-LeftField-Mini-Standard-Riser-54mm_01_web.png?v=1772898730"},{"product_id":"dji-manfrotto-receiver-for-15mm-19mm-studio","title":"DJI\/Manfrotto Receiver for 15mm \u0026 19mm Studio","description":"","brand":"0","offers":[{"title":"Default Title","offer_id":56059001078086,"sku":"B4003.1072","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4003_1072-DJIManfrotto-Receiver-for-15mm-and-19mm-Studio-Baseplates_03_web.png?v=1772899349"},{"product_id":"canon-c200-c300iii-c500ii-riser-for-baseplate","title":"Canon C200\/C500 II\/C300 III\/C700 Riser for 15mm Baseplate","description":"\u003cp\u003e\u003ciframe id=\"ytplayer\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/zre6-i5wJGc?\u0026amp;rel=0\u0026amp;showinfo=0\u0026amp;modestbranding=1\u0026amp;autoplay=1\u0026amp;loop=1\" width=\"640\" height=\"360\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003cspan data-mce-type=\"bookmark\" style=\"display: inline-block; width: 0px; overflow: hidden; line-height: 0;\" class=\"mce_SELRES_start\"\u003e\u003c\/span\u003e\u003cspan data-mce-type=\"bookmark\" style=\"display: inline-block; width: 0px; overflow: hidden; line-height: 0;\" class=\"mce‐SELRES‐start\"\u003e_\u003c\/span\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThis Riser block mounts to the Left Field 15mm \u003ca href=\"https:\/\/brighttangerine.com\/product-category\/camera-accessories\/bridgeplates-baseplates\/baseplates\/\"\u003eLWS Baseplate\u003c\/a\u003e core and sets the Canon C200, C200B, C300 Mark III, C500 Mark II, C700 \u0026amp; C700 FF to the correct height for use with 15mm LWS rods.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe riser block features a slotted design with captive screws allowing the camera to be removed from the baseplate quickly if required.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe interchangeable riser block connects to the Left Field 15mm LWS Baseplate Core using six screws.\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56120475189574,"sku":"B4005.1001","price":67.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4005_1001-C500MKII-C200-C700_web.png?v=1772888590"},{"product_id":"sony-venice-riser-for-left-field-15mm-lws-baseplate","title":"Standard Riser for LeftField 3 15mm Baseplate - Blackmagic URSA Cine, Sony VENICE \u0026 BURANO","description":"\u003cp\u003e\u003ciframe id=\"ytplayer\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/zre6-i5wJGc?\u0026amp;rel=0\u0026amp;showinfo=0\u0026amp;modestbranding=1\u0026amp;autoplay=1\u0026amp;loop=1\" width=\"640\" height=\"360\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003cspan data-mce-type=\"bookmark\" style=\"display: inline-block; width: 0px; overflow: hidden; line-height: 0;\" class=\"mce_SELRES_start\"\u003e\u003c\/span\u003e\u003cspan data-mce-type=\"bookmark\" style=\"display: inline-block; width: 0px; overflow: hidden; line-height: 0;\" class=\"mce‐SELRES‐start\"\u003e_\u003c\/span\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eSet your camera to new heights with this Riser for LeftField 3 baseplates: compatible with cameras including the Blackmagic URSA Cine, URSA Mini and Sony VENICE \u0026amp; BURANO. Designed to elevate these cameras to the 15mm LWS standard height, this riser features sliding screws for mounting the camera, and installs cleanly to the LeftField 3.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eReady for Shooting\u003c\/p\u003e\n\u003cp\u003eThe Riser is designed to bridge the gap between the LeftField 3 Baseplate and a range of cameras, raising their optical centre to the 85mm height required for 15mm LWS accessories. This means you can pair the versatility of rod-mounted accessories like follow-focus wheels and matte boxes with the convenience of our quick-release baseplate system.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eBroad Compatibility\u003c\/p\u003e\n\u003cp\u003eThough camera optical heights vary, this Standard Riser is the correct choice for a diverse range of cameras. Compatible with the Blackmagic URSA Cine and URSA Mini, you can benefit from a LeftField setup in a range of shooting scenarios.\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56120528830790,"sku":"B4004.1001","price":67.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4004_1001-Sony-VENICE-URSA-Mini-Riser-01.png?v=1772889254"},{"product_id":"canon-c100-c300-c500-sony-fs7-riser-for-15mm-baseplate","title":"Canon C100\/C300\/C500\/Sony FS7\/FX9 Riser for 15mm Baseplate","description":"\u003cp\u003e\u003ciframe id=\"ytplayer\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/zre6-i5wJGc?\u0026amp;rel=0\u0026amp;showinfo=0\u0026amp;modestbranding=1\u0026amp;autoplay=0\u0026amp;loop=1\" width=\"640\" height=\"360\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003cspan data-mce-type=\"bookmark\" style=\"display: inline-block; width: 0px; overflow: hidden; line-height: 0;\" class=\"mce_SELRES_start\"\u003e\u003c\/span\u003e\u003cspan data-mce-type=\"bookmark\" style=\"display: inline-block; width: 0px; overflow: hidden; line-height: 0;\" class=\"mce‐SELRES‐start\"\u003e_\u003c\/span\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThis Riser block mounts to the Left Field 15mm \u003ca href=\"https:\/\/brighttangerine.com\/product-category\/camera-accessories\/bridgeplates-baseplates\/baseplates\/\"\u003eLWS Baseplate \u003c\/a\u003ecore and sets the Canon C100 (I \u0026amp; II), C300 (I \u0026amp; II), C500, Sony FS7 (I \u0026amp; II) \u0026amp; FX9 to the correct height for use with 15mm LWS rods.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe riser include 1\/4-20\" \u0026amp; 3\/8-16\" captive screws.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe riser block features a slotted design with captive screws allowing the camera to be removed from the baseplate quickly if required.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe interchangeable riser block connects to the Left Field 15mm LWS Baseplate Core using six screws.\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56120664555846,"sku":"B4005.1006","price":67.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4005_1006-FS7-C100-C300-C500_web.png?v=1772889536"},{"product_id":"sony-fs5-panasonic-eva1-varicam-lt-varicam-35-riser-for-15mm-baseplate","title":"Standard Riser for LeftField 3 15mm Baseplate (Blackmagic, Panasonic, Varicam, Sony)","description":"\u003cp\u003e\u003ciframe id=\"ytplayer\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/zre6-i5wJGc?\u0026amp;rel=0\u0026amp;showinfo=0\u0026amp;modestbranding=1\u0026amp;autoplay=1\u0026amp;loop=1\" width=\"640\" height=\"360\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003cspan data-mce-type=\"bookmark\" style=\"display: inline-block; width: 0px; overflow: hidden; line-height: 0;\" class=\"mce_SELRES_start\"\u003e\u003c\/span\u003e\u003cspan data-mce-type=\"bookmark\" style=\"display: inline-block; width: 0px; overflow: hidden; line-height: 0;\" class=\"mce‐SELRES‐start\"\u003e_\u003c\/span\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eSet your camera to new heights with this Riser for LeftField 3 baseplates: compatible with cameras including the Blackmagic PYXIS, Varicam LT and Panasonic EVA-1. Designed to elevate these cameras to the 15mm LWS standard height, this riser features sliding screws for mounting the camera, and installs cleanly to the LeftField 3.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eReady for Shooting\u003c\/p\u003e\n\u003cp\u003eThe Riser is designed to bridge the gap between the LeftField 3 Baseplate and a range of cameras, raising their optical centre to the 85mm height required for 15mm LWS accessories. This means you can pair the versatility of rod-mounted accessories like follow-focus wheels and matte boxes with the convenience of our quick-release baseplate system.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eBroad Compatibility\u003c\/p\u003e\n\u003cp\u003eThough camera optical heights vary, this Standard Riser is the correct choice for a diverse range of cameras. Compatible with the Blackmagic PYXIS, Sony FS5, Panasonic EVA-1 as well as the Varicam LT and Varicam 35; you can benefit from a LeftField setup in a range of shooting scenarios.\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56120664621382,"sku":"B4004.1003","price":67.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4004_1003-EVA1-Varicam-FS5_web.png?v=1772889546"},{"product_id":"canon-c70-dji-zhiyun-riser-for-15mm-baseplate","title":"Canon Riser for LeftField 3 15mm LWS Baseplate (DJI RS 4)","description":"\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/LgPC-Ok5IVo\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThis Canon DJI RS 4 \u0026amp; RS 3 Riser mounts to the LeftField 15mm LWS Baseplate, providing a quick release base for DJI RS dovetails. When paired with the DJI RS 4 \u0026amp; RS 3 Dovetail for the Canon C70, C80, C400 or the Blackmagic PYXIS the camera will sit at the correct 15mm LWS standard height.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan lang=\"EN-US\"\u003eCompatibility\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe riser is designed for the LeftField 15mm LWS Baseplate \u0026amp; DJI RS 4 \u0026amp; RS 3 Dovetail; and sets the following cameras to the correct height:\u003c\/p\u003e\n\u003cp\u003eBlackmagic PYXIS\u003c\/p\u003e\n\u003cp\u003eCanon C70\u003c\/p\u003e\n\u003cp\u003eCanon C80\u003c\/p\u003e\n\u003cp\u003eCanon C400\u003c\/p\u003e\n\u003cp\u003eThe Riser requires a compatible dovetail, such as our \u003ca href=\"https:\/\/brighttangerine.com\/product\/universal-dovetail-for-manfrotto-dji-rs-4\/\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eUniversal Dovetail\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e, for quickly switching between the LeftField Baseplate and compatible DJI gimbals.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eSafety Release\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe riser has an integrated safety which prevents the dovetail from falling out accidentally. To release the dovetail, unlock the clamp and press the orange safety before sliding out the camera.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan lang=\"EN-US\"\u003eNo Compromise\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eMachined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability. Every Canon DJI RS 4 \u0026amp; RS 3 Riser comes with our famous Bright Tangerine Support and the addition of a 5-year warranty.\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56121173934406,"sku":"B4005.1023","price":157.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4005_1023-C70_DJI_Riser-01_web-1.png?v=1772892883"},{"product_id":"canon-c70-dji-riser-kit-for-15mm-lws-baseplate","title":"DJI RS 4 \u0026 RS 3 Riser Kit for 15mm Baseplate (Canon C70)","description":"\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/LgPC-Ok5IVo\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eSet up the Canon C70 for 15mm LWS configurations with the ability to quickly switch between the DJI RS 4\/RS 3 \u0026amp; the LeftField 15mm LWS Baseplate.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eWith the included RS 4 dovetail plate, transitioning from gimbal to tripod or handheld is seamless. Quickly release between setups without the need to dismount or swap plates.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan lang=\"EN-US\"\u003eFor DJI RS Gimbals\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe dovetail is compatible with the RS series of gimbals from DJI including the latest RS 4 Pro, RS 4 and RS 3 Pro \u0026amp; RS 3, allowing it to be loaded directly onto the gimbal without the need to change camera plates. The extra length provides ample room for balancing \u0026amp; adjustment. Laser etched markers along the length of the dovetail let ACs mark down balanced positions on the gimbal.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan lang=\"EN-US\"\u003eSupport for Accessories\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eLens adapters can be secured using the front channel and supplied screws. Three M4 points can be used to mount the DJI Focus Motor Rod Mount.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan lang=\"EN-US\"\u003eCompatibility\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe DJI gimbal plates ship from the factory with washers of varying thicknesses. While these variations work fine with DJI’s own plate, they may cause clearance issues with the Bright Tangerine DJI compatible plates. This is due to the low-profile design of the protruding support and anti-rotation features, which are crucial for securing the camera.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eIf you are finding that the bottom of the Bright Tangerine DJI plate is hitting the grey clamp lever and preventing fore and aft slide, you can swap the original washer out with the thinner one supplied in this kit. This will lower the grey lever sufficiently to clear the Bright Tangerine DJI plate. Please note, the use of the thinner washer in this kit will not impact the use of any other baseplates on the DJI camera plate.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan lang=\"EN-US\"\u003eInstructions\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eReplacing The Washer\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eStep 1: Use a T6 Torx driver (RS4) or 1.5mm hex key (RS 3 and 2) to loosen the central screw and carefully place aside.\u003cbr\u003e\nStep 2: Carefully remove the clamp lever.\u003cbr\u003e\nStep 3: Unscrew the clamp bolt. The bolt head resembles a small gear.\u003cbr\u003e\nStep 4: While unscrewing the clamp bolt, keep the clamp wedge pressed down with your fingers. This will prevent the springs dislodging the clamp wedge.\u003cbr\u003e\nStep 5: Replace the thicker washer with the thinner one in the kit, and immediately re-screw the clamp bolt back into position.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eCalibrating the Clamp Lever\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eStep 1: Place the Bright Tangerine DJI plate into the clamp as normal. Screw the gear-like bolt head down gently with your fingers until the clamp wedge is just touching the plate.\u003cbr\u003e\nStep 2: Note how the top of the bolt and the inside of the clamp lever have matching serrated gear-like teeth.\u003cbr\u003e\nStep 3: Place the clamp lever back over the head of the gear-like bolt head.\u003cbr\u003e\nStep 4: Before replacing the central screw, swing the clamp lever back and forth and check that the plate is locked in the fully locked position, and is able to slide in the unlocked position.\u003cbr\u003e\nStep 5: You may need to reposition the clamp lever on the gear-like bolt, by lifting it up and re-engaging it with the teeth in a different position. This is much like using a wrench or spanner on a hex bolt.\u003cbr\u003e\nStep 6: Once you have got the lever movement tuned and clamping securely, replace the central screw.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan lang=\"EN-US\"\u003eNo Compromises\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eMachined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability. The DJI RS 4 \u0026amp; RS 3 Riser Kit for 15mm Baseplate (Canon C70) comes with our famous Bright Tangerine Support and the addition of a 2-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/6km8tP4gEPs\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56121279807814,"sku":"B4005.0034","price":274.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4005_0034-C70_DJI_Riser-Kit-02_web.png?v=1772893091"},{"product_id":"zcam-standard-riser-for-15mm-baseplate","title":"Z Cam Standard Riser for 15mm Baseplate","description":"\u003cp class=\"productcopy\"\u003eThis Standard riser block for Z CAM E2 mounts to the Left Field 15mm LWS Baseplate core and sets your camera to the correct height for use with 15mm LWS rods. It features a slotted design to allow the camera to be balanced on the riser. The included washer plate prevents the screws from dropping out.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eWHAT’S INCLUDED:\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe interchangeable riser block connects to the Left Field 15mm LWS Baseplate Core using six screws provided. It includes two 1\/4\" mounting screws which are made captive using the included washer plate.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eEXTRA CARE COMES STANDARD\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eMachined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability. Every \u003ca href=\"https:\/\/brighttangerine.com\/product-category\/camera-accessories\/bridgeplates-baseplates\/baseplates\/\"\u003eZ CAM Standard Riser\u003c\/a\u003e comes with our famous Bright Tangerine Support and the addition of a 5-year warranty.\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56121888735558,"sku":"B4008.1001","price":97.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4008_1001-Z-Cam-Riser-01.png?v=1772894265"},{"product_id":"red-v-raptor-manfrotto-riser-for-15mm-baseplate","title":"RED V-RAPTOR (Manfrotto\/DJI RS 4 \u0026 RS 3) Riser for 15mm Baseplate","description":"\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/yxuofJUMivQ\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003cspan data-mce-type=\"bookmark\" style=\"display: inline-block; width: 0px; overflow: hidden; line-height: 0;\" class=\"mce_SELRES_start\"\u003e\u003c\/span\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThis interchangeable riser combines with LeftField 15mm LWS Baseplates and acts as a receiver for compatible Manfrotto \u0026amp; DJI dovetails.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe riser sets the RED V-RAPTOR at the correct height for 15mm LWS standards in combination with the dovetails. The quick release clamp enables fast transitions between setups.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan lang=\"EN-US\"\u003eReliable \u0026amp; Safe\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe riser comes preinstalled with the Ratchet Lock Lever which can be swapped out for the low profile locking screw.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe screw option requires a 4mm Hex key to securely tighten down the clamp with a higher force than a lever. Swapping out the lever removes the risk of it being knocked during operation.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eWhen removing the dovetail, the safety is required to be pressed before the camera can be released.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan lang=\"EN-US\"\u003eCompatible with DJI RS 4 \u0026amp; RS 3 Gimbal Plates plus Manfrotto 501PL\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe receiver is compatible with our Manfrotto \u0026amp; DJI RS gimbal dovetails. When using other plates, the height may vary resulting in non-standard heights.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan lang=\"EN-US\"\u003eExtra Care Comes Standard\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eMachined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability. The RED V-RAPTOR (Manfrotto \u0026amp; DJI RS 4 \u0026amp; 3) Riser for 15mm Baseplate comes with our famous Bright Tangerine Support and the addition of a 2-year warranty.\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56121965150534,"sku":"B4002.1062","price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4002_1062-RED-V-RAPTOR-Manfrotto-Riser-for-15mm-Baseplate.png?v=1772894572"},{"product_id":"manfrotto-riser-kit-for-15mm-baseplate-red-v-raptor","title":"Manfrotto Riser Kit for 15mm Baseplate (RED V‑RAPTOR)","description":"\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/yxuofJUMivQ\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003cspan data-mce-type=\"bookmark\" style=\"display: inline-block; width: 0px; overflow: hidden; line-height: 0;\" class=\"mce_SELRES_start\"\u003e\u003c\/span\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eSet up the RED V-RAPTOR for 15mm LWS configurations with the ability to quickly switch between the LeftField 15mm LWS Baseplate and compatible gimbals \u0026amp; receiver plates.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eUsing the three captive screws on the captive shuttle, the camera can be securely mounted with no twisting or movement.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eMANFROTTO 501PL COMPATIBLE\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe dovetail uses the Manfrotto 501PL standard allowing it to be loaded directly onto compatible receivers \u0026amp; gimbals without the need to change camera plates. The extra length provides ample room for balancing \u0026amp; adjustment.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eLaser etched markers along the length of the dovetail let ACs mark down balanced positions on the gimbal.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eSUPPORT FOR ACCESSORIES\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eLens adapters can be secured using the front channel and supplied screws.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eNO COMPROMISES\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eMachined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability. The Manfrotto Riser Kit for 15mm Baseplate (RED V-RAPTOR) comes with our famous Bright Tangerine Support and the addition of a 2-year warranty.\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56122057851206,"sku":"B4002.0054","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4002_0054-Manfrotto-Riser-Kit-for-15mm-Baseplate-RED-V-RAPTOR-00.png?v=1772894680"},{"product_id":"movi-pro-riser-kit-for-15mm-baseplate-red-v-raptor","title":"Movi Pro Riser Kit for 15mm Baseplate (RED V‑RAPTOR)","description":"\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/yxuofJUMivQ\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eSet up the RED V-RAPTOR for 15mm LWS configurations with the ability to quickly switch between the Freefly Systems Movi Pro \u0026amp; the LeftField 15mm LWS Baseplate.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eUsing the three captive screws on the captive shuttle, the camera can be securely mounted with no twisting or movement.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eFREEFLY SYSTEMS MOVI PRO COMPATIBLE\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe dovetail is compatible with the Freefly Systems Movi Pro, allowing it to be loaded directly onto the gimbal without the need to change camera plates. The extra length provides ample room for balancing \u0026amp; adjustment.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eLaser etched markers along the length of the dovetail let ACs mark down balanced positions on the gimbal.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eSUPPORT FOR ACCESSORIES\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eLens adapters can be secured using the front channel and supplied screws. Two M3 points can be used to mount the Freefly Movi Rod Mount Adapter.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eNO COMPROMISES\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eMachined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability. The \u003ca href=\"https:\/\/brighttangerine.com\/product-category\/camera-accessories\/bridgeplates-baseplates\/baseplates\/\"\u003eMovi Pro Riser Kit for 15mm Baseplate (RED V-RAPTOR)\u003c\/a\u003e comes with our famous Bright Tangerine Support and the addition of a 2-year warranty.\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56122057916742,"sku":"B4002.0056","price":339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4002_0056-Movi-Pro-Riser-Kit-for-15mm-Baseplate-RED-V-RAPTOR-00.png?v=1772894699"},{"product_id":"sony-venice-2-split-riser-for-15mm-baseplate","title":"Sony VENICE 1 \u0026 2 Split Riser for 15mm Baseplate","description":"\u003cp class=\"productcopy\"\u003eThis riser is a two-part design consisting of the upper \u0026amp; riser plates. It combines with B4003.1034 15mm LWS Baseplate Core.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe upper plate attaches directly to the bottom of the camera and the riser plate mounts to the baseplate core. The camera with the upper plate can then be secured to the baseplate. The fore\/aft positioning of the camera can be adjusted for optimal balance before engaging the locating pins to ensure proper alignment.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eGIMBAL READY\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eFor gimbal \u0026amp; steadicam work, the camera can be quickly detached from the baseplate providing a low profile form factor, ready to be connected to dovetails and other quick release plates with a stable 75mm wide base By removing the baseplate, it lowers the center of gravity and reduces the overall weight of the build.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe upper plate also provides mounting points for B4004.1021 \u0026amp; B4004.1022 Side Plates. Combined with B4004 1020 Sliding Top Plate, they form a rigid cage around the camera.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eZERO COMPROMISES\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eAbsolutely no compromise has been made in our manufacturing process. Our engineering is focused on creating products that are both high-performance and enabled with a longer life of service. Combine that with unparalleled level of Bright Tangerine support, and your \u003ca href=\"https:\/\/brighttangerine.com\/product-category\/camera-accessories\/bridgeplates-baseplates\/baseplates\/\"\u003eSony VENICE 1 \u0026amp; 2 Split Riser for 15mm Baseplate\u003c\/a\u003e becomes the most reliable and hardworking partnership that any filmmaker could wish for.\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56122058244422,"sku":"B4004.1024","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4004_1024-Sony-VENICE-1-2-split-riser-for-15mm-baseplate-00_web.png?v=1772894777"},{"product_id":"dji-rs-4-rs-3-riser-kit-for-15mm-baseplate-red-v-raptor","title":"DJI RS 4 \u0026 RS 3 Riser Kit for 15mm Baseplate (RED V-RAPTOR)","description":"\u003cp class=\"productcopy\"\u003eSet up the RED V-RAPTOR for 15mm LWS configurations with the ability to quickly switch between the DJI RS 4\/RS 3 \u0026amp; the LeftField 15mm LWS Baseplate.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eWith the included RS 4 dovetail plate, transitioning from gimbal to tripod or handheld is seamless. Quickly release between setups without the need to dismount or swap plates.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eUsing the three captive screws on the captive shuttle, the camera can be securely mounted with no twisting or movement.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan lang=\"EN-US\"\u003eFor DJI RS Gimbals\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe dovetail is compatible with the RS series of gimbals from DJI including the latest RS 4 Pro, RS 4 and RS 3 Pro \u0026amp; RS 3, allowing it to be loaded directly onto the gimbal without the need to change camera plates. The extra length provides ample room for balancing \u0026amp; adjustment. Laser etched markers along the length of the dovetail let ACs mark down balanced positions on the gimbal.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan lang=\"EN-US\"\u003eSupport for Accessories\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eLens adapters can be secured using the front channel and supplied screws. Three M4 points can be used to mount the DJI Focus Motor Rod Mount.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan lang=\"EN-US\"\u003eCompatibility\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eThe DJI gimbal plates ship from the factory with washers of varying thicknesses. While these variations work fine with DJI’s own plate, they may cause clearance issues with the Bright Tangerine DJI compatible plates. This is due to the low-profile design of the protruding support and anti-rotation features, which are crucial for securing the camera.\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eIf you are finding that the bottom of the Bright Tangerine DJI plate is hitting the grey clamp lever and preventing fore and aft slide, you can swap the original washer out with the thinner one supplied in this kit. This will lower the grey lever sufficiently to clear the Bright Tangerine DJI plate. Please note, the use of the thinner washer in this kit will not impact the use of any other baseplates on the DJI camera plate.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan lang=\"EN-US\"\u003eInstructions\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cb\u003eReplacing The Washer\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eStep 1: Use a T6 Torx driver (RS4) or 1.5mm hex key (RS 3 and 2) to loosen the central screw and carefully place aside.\u003cbr\u003e\nStep 2: Carefully remove the clamp lever.\u003cbr\u003e\nStep 3: Unscrew the clamp bolt. The bolt head resembles a small gear.\u003cbr\u003e\nStep 4: While unscrewing the clamp bolt, keep the clamp wedge pressed down with your fingers. This will prevent the springs dislodging the clamp wedge.\u003cbr\u003e\nStep 5: Replace the thicker washer with the thinner one in the kit, and immediately re-screw the clamp bolt back into position.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cb\u003eCalibrating the Clamp Lever\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003eStep 1: Place the Bright Tangerine DJI plate into the clamp as normal. Screw the gear-like bolt head down gently with your fingers until the clamp wedge is just touching the plate.\u003cbr\u003e\nStep 2: Note how the top of the bolt and the inside of the clamp lever have matching serrated gear-like teeth.\u003cbr\u003e\nStep 3: Place the clamp lever back over the head of the gear-like bolt head.\u003cbr\u003e\nStep 4: Before replacing the central screw, swing the clamp lever back and forth and check that the plate is locked in the fully locked position, and is able to slide in the unlocked position.\u003cbr\u003e\nStep 5: You may need to reposition the clamp lever on the gear-like bolt, by lifting it up and re-engaging it with the teeth in a different position. This is much like using a wrench or spanner on a hex bolt.\u003cbr\u003e\nStep 6: Once you have got the lever movement tuned and clamping securely, replace the central screw.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan lang=\"EN-US\"\u003eNo Compromises\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003e\u003cspan class=\"ShortCopy\"\u003eBright Tangerine offers the best camera accessories for filmmakers looking for premium quality. Every component is designed with filmmakers in mind and tested to the highest standards; ensuring maximised compatibility and usefulness on every set. \u003c\/span\u003e\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56122573521222,"sku":"B4002.0161","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4002_0161-DJI-RS-Riser-Kit-for-15mm-Baseplate-RED-V-RAPTOR-00_web.png?v=1772896180"},{"product_id":"standard-riser-for-15mm-baseplate-for-red-komodo-x","title":"Standard Riser for 15mm Baseplate for RED KOMODO \u0026 KOMODO-X","description":"\u003cp\u003eThis Standard riser for the RED KOMODO \u0026amp; KOMODO-X mounts to the LeftField 15mm\u003ca href=\"https:\/\/brighttangerine.com\/product-category\/camera-accessories\/bridgeplates-baseplates\/baseplates\/\"\u003e LWS Baseplate\u003c\/a\u003e core and sets your camera to the correct height for use with 15mm LWS rods. It features a slotted design to allow the camera to be balanced on the riser.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eCompatible with RED KOMODO-X \u0026amp; KOMODO\u003c\/p\u003e\n\u003cp\u003eThe riser comes with two sets of washer plates that are uniquely designed to match the screw spacing of RED KOMODO or KOMODO-X. Each plate accommodates a 1\/4\" \u0026amp; 3\/8\" screw.\u003c\/p\u003e\n\u003cp\u003eTo mount your KOMODO, opt for the plate with screw holes spaced closer together (12.5mm). For the KOMODO-X, choose the plate with screw holes spaced further apart (25mm).\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eInterchangeable Risers\u003c\/p\u003e\n\u003cp\u003eThis is just one of the many risers in our range designed for the LeftField 15mm LWS Baseplate. Switching camera systems is made easy by simply swapping this riser to achieve the correct 15mm LWS height for your camera.\u003c\/p\u003e\n\u003cp\u003eThe riser connects to the LeftField 15mm LWS Baseplate using six screws provided.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eNo Compromises\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003e\u003cspan class=\"ShortCopy\"\u003eBright Tangerine offers the best camera accessories for filmmakers looking for premium quality. Every component is designed with filmmakers in mind and tested to the highest standards; ensuring maximised compatibility and usefulness on every set. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/xlzUEvEzcjM\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56122679427398,"sku":"B4002.1123","price":97.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4002_1123-Standard-Riser-for-KOMODO-X-00_web.png?v=1772896272"},{"product_id":"manfrotto-dji-rs-4-riser-for-15mm-baseplate-red-komodo-komodo-x","title":"Manfrotto \u0026 DJI RS 4 Riser for 15mm Baseplate (RED KOMODO\/KOMODO-X)","description":"\u003cp\u003eThis DJI RS 4 \u0026amp; RS 3 Riser for RED KOMODO® \u0026amp; KOMODO-X mounts to the LeftField 15mm LWS Baseplate and sets your camera to the correct height for use with 15mm LWS rods and accessories.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eCompatibility\u003c\/p\u003e\n\u003cp\u003eThis riser is compatible with a number of dovetails but primarily designed to pair with B4003.1040 - Universal DJI RS 4, RS 3 \u0026amp; RS 2 Dovetail.\u003c\/p\u003e\n\u003cp\u003eIt is also compatible with older DJI RS 2 \u0026amp; RS 3 Dovetails including B4002.1018, B4002.1019, B4003.1034, B4003.1031 \u0026amp; B4002.1071.\u003c\/p\u003e\n\u003cp\u003eIn addition to DJI RS dovetails, it is also compatible with Manfrotto 501PL standard dovetails \u0026amp; plates.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eExtra care comes standard\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003e\u003cspan class=\"ShortCopy\"\u003eBright Tangerine offers the best camera accessories for filmmakers looking for premium quality. Every component is designed with filmmakers in mind and tested to the highest standards; ensuring maximised compatibility and usefulness on every set. \u003c\/span\u003e\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56122952581446,"sku":"B4002.1032","price":177.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4002_1032-Manfrotto-DJI-RS-4-Riser-for-15mm-Baseplate-RED-KOMODO-KOMODO-X_00_web.png?v=1772897146"},{"product_id":"leftfield-3-bud-riser-spacer-for-canon-c400","title":"LeftField 3 BUD Spacer (Canon)","description":"\u003cp\u003eDesigned to work with the latest Canon cameras, the LeftField 3 BUD Spacer is an essential for integrating  Balance Utility Dovetail (BUD) workflows. Coupled with our dedicated 15mm LWS Baseplate and BUD Riser, the spacer ensures that your camera is set to the standard height.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eNothing Out of Left-field\u003c\/p\u003e\n\u003cp\u003eThe BUD Spacer connects to LeftField 3 15mm LWS Baseplates. This adaptability means that existing equipment isn’t made redundant, allowing for flexibility in constructing a camera setup for new Canon cameras without entirely new parts.\u003c\/p\u003e\n\u003cp\u003eWhen switching camera systems, only the riser will need to be replaced to set different camera heights.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eUbiquitous Design\u003c\/p\u003e\n\u003cp\u003eUsing M4 screws, which are easily installed with a 3mm Hex Key, attaching the BUD Spacer is a quick and easy process. Going on top of your choice of baseplate such as the \u003ca href=\"https:\/\/brighttangerine.com\/store\/leftfield-3-15mm-lws-qr-baseplate-core\/#\" target=\"_blank\" rel=\"noopener\"\u003e\u003cu\u003eB4003.1034 – LeftField 3 15mm LWS Baseplate Core\u003c\/u\u003e \u003c\/a\u003eand below the \u003cu\u003e\u003ca href=\"https:\/\/brighttangerine.com\/store\/bud-riser-for-leftfield-3-15mm-lws-qr-baseplate\/\" target=\"_blank\" rel=\"noopener\"\u003eB4003.1036 – Universal BUD Riser\u003c\/a\u003e.\u003c\/u\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eTrademark Quality\u003c\/p\u003e\n\u003cp\u003eBright Tangerine prides itself on its quality and longevity: all components are built to last. As such, this spacer is future-proofed: made from anodised aluminium for a corrosion-resistant finish, as well as being lightweight and sturdy. Purpose-built for the Canon C400 and C80, your dovetail setup is sure to work with the latest Canon offerings.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eA Critical Component\u003c\/p\u003e\n\u003cp\u003eThe BUD Spacer must be used with \u003ca href=\"https:\/\/brighttangerine.com\/store\/bud-riser-for-leftfield-3-15mm-lws-qr-baseplate\/\" target=\"_blank\" rel=\"noopener\"\u003eB4003.1036 – LeftField 3 Universal BUD Riser\u003c\/a\u003e to form the complete system.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eCompatibility\u003c\/p\u003e\n\u003cp\u003eThe LeftField 3 BUD Spacer is designed for use within our LeftField 3 system, and is compatible with both the \u003cu\u003eB\u003ca href=\"https:\/\/brighttangerine.com\/store\/leftfield-3-15mm-lws-qr-baseplate-core\/#\" target=\"_blank\" rel=\"noopener\"\u003e4003.1034 – LeftField 3 15mm LWS Baseplate \u003c\/a\u003e\u003c\/u\u003eand the \u003ca href=\"https:\/\/brighttangerine.com\/store\/leftfield-3-arri-bud-compatible-15mm-lws-baseplate\/\" target=\"_blank\" rel=\"noopener\"\u003e\u003cu\u003eB4004.1039 – LeftField 3 BUD 15mm LWS Baseplate\u003c\/u\u003e\u003c\/a\u003e. It is also required to work with the \u003ca href=\"https:\/\/brighttangerine.com\/store\/bud-riser-for-leftfield-3-15mm-lws-qr-baseplate\/\" target=\"_blank\" rel=\"noopener\"\u003e\u003cu\u003eB4003.1036 – Universal BUD Riser \u003c\/u\u003e\u003c\/a\u003eand \u003ca href=\"https:\/\/brighttangerine.com\/store\/universal-bud-plate\/\" target=\"_blank\" rel=\"noopener\"\u003e\u003cu\u003eB4003.1056 – Universal BUD Plate\u003c\/u\u003e\u003c\/a\u003e to mount compatible Canon camera systems:\u003c\/p\u003e\n\u003cp\u003eCanon C300 Mark III\u003c\/p\u003e\n\u003cp\u003eCanon C400\u003c\/p\u003e\n\u003cp\u003eCanon C500 Mark II\u003c\/p\u003e\n\u003cp\u003eCanon C70\u003c\/p\u003e\n\u003cp\u003eCanon C80\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eWhat’s Included\u003c\/p\u003e\n\u003cp\u003e1x LeftField 3 BUD Spacer\u003c\/p\u003e\n\u003cp\u003e4x M4 Screws\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003ePart of the LeftField System\u003c\/p\u003e\n\u003cp\u003eThe LeftField 3 system of baseplates and bridgeplates is optimised for high-quality ARRI Balanced Utility Dovetail (BUD) use. Compatible with high-end cinema cameras such as the Canon C400 and the Sony BURANO, the LeftField system allows for versatile sliding dovetails with stable weight and balance.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eZero Compromises\u003c\/p\u003e\n\u003cp\u003eManufactured in the heart of the UK, Bright Tangerine are committed to the highest standards of quality. Researched, designed and tested by a team of experts; our products are the number-one choice of professional filmmakers worldwide. Our customer support team are on hand to help with any product issues, and provide the most reliable advice on all of our products.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eWarranty\u003c\/p\u003e\n\u003cp\u003e24 months\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56122959724870,"sku":"B4005.1037","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4005_1037-LeftField-3-BUD-Spacer-Canon_00_web.png?v=1772897421"},{"product_id":"bud-riser-for-leftfield-3-15mm-lws-qr-baseplate","title":"LeftField 3 Universal BUD Riser","description":"\u003cp\u003eTake your camera system to new heights with the LeftField 3 Universal BUD Riser. Designed to integrate ARRI BUD with our 15mm LWS Universal Baseplate. It attaches to specific LeftField 3 BUD Spacers to set the camera to standard heights.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eRise Above the Competition\u003c\/p\u003e\n\u003cp\u003eThe riser ads an ARRI BUD dovetail on top B4003.1034 - LeftField 3 15mm LWS Universal Baseplate, allowing you to use any compatible BUD clamp with an ARRI dovetail platform. This combines the speed of BUD with the stability of the ARRI dovetail.\u003c\/p\u003e\n\u003cp\u003eDifferent cameras can be used with the platform, using interchangeable BUD spacers to achieve correct standard heights.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eMade to Last\u003c\/p\u003e\n\u003cp\u003eConstructed from anodised aluminium, the BUD Riser is resilient to the rigors of filmmaking environments whilst remaining lightweight. Its durability guarantees long-lasting performance under varied shooting conditions.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eInstructions\/Assembly\u003c\/p\u003e\n\u003cp\u003e1. To install the BUD Riser, line up the four M4 screws to the BUD spacer such as the \u003ca href=\"https:\/\/brighttangerine.com\/store\/leftfield-3-bud-riser-spacer-for-canon-c400\/\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eB4005.1037 - LeftField 3 BUD Spacer (Canon)\u003c\/span\u003e\u003c\/a\u003e which is already assembled on the baseplate.\u003c\/p\u003e\n\u003cp\u003e2. Secure the screws with a 3mm Hex key in an alternating fashion.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eCompatibility\u003c\/p\u003e\n\u003cp\u003eThe LeftField 3 Universal BUD Riser is designed to be compatible with as many camera systems with interchangeable risers. The BUD dovetail uses the wider 88mm standard with ARRI BUD-1 \u0026amp; BUD-3. It is compatible with:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/brighttangerine.com\/store\/universal-bud-plate\/\" target=\"_blank\" rel=\"noopener\"\u003e\u003cu\u003eB4003.1056 – Universal BUD Plate\u003c\/u\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/brighttangerine.com\/store\/leftfield-3-bud-riser-spacer-for-canon-c400\/\" target=\"_blank\" rel=\"noopener\"\u003e\u003cu\u003eB4005.1037 - LeftField 3 BUD Spacer (Canon)\u003c\/u\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eWhat’s Included\u003c\/p\u003e\n\u003cp\u003e1x Universal BUD Riser\u003c\/p\u003e\n\u003cp\u003e4x M4 Screws\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003ePart of the LeftField System\u003c\/p\u003e\n\u003cp\u003eThe LeftField 3 system is a comprehensive collection of components, designed to maximise compatibility between camera systems and ARRI’s Balanced Utility Dovetail (BUD) standard of quick-release supports. Made from sturdy anodised aluminium and offering alternate components for the latest camera bodies, the LeftField system is the only choice for video professionals.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eZero Compromises\u003c\/p\u003e\n\u003cp\u003eFrom our UK base, Bright Tangerine manufactures a diverse array of products, but the common denominator is the consistent quality and longevity. Designed from the ground-up to be reliable and practical problem-solving tools for filmmakers, everything we make are made to last. Should you find that any of our products fail to meet your expectations, our dedicated customer service team is on hand to advise and assist.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eWarranty\u003cbr\u003e\n24 months\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56122960380230,"sku":"B4003.1036","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4003_1036-LeftField-3-Universal-BUD-Riser_02_web.png?v=1772897482"},{"product_id":"canon-riser-for-leftfield-mini-dji-rs","title":"DJI Riser Mount for LeftField Mini","description":"\u003cp\u003eThe DJI Riser Mount for LeftField Mini allows you to use a range of Canon cameras with DJI RS gimbals: setting the camera to the correct height when paired with DJI dovetails. Using a modular system of three plates, the Riser mounts cleanly to the \u003ca href=\"https:\/\/brighttangerine.com\/product\/leftfield-mini-15mm-lws-baseplate\/\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003e\u003cu\u003eLeftField Mini Baseplate\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e, with an easy-press safety for quick-release.\u003c\/p\u003e\n\u003cp\u003eLightweight and practical, the Riser is compatible with a range of Canon cameras including the Canon C70, C80 and C400 - as well as the Blackmagic PYXIS.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eDesigned for DJI\u003c\/p\u003e\n\u003cp\u003eThe Riser is designed to be used with DJI RS gimbals and dovetail plates, providing the necessary height clearance from the camera’s optical centre. Dovetails are front-loaded into the Riser, offering sliding travel, before being locked in place with the ratcheting lever clamp.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eClean Installation\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003e\u003cspan class=\"ShortCopy\"\u003eThe Riser comes in three distinct parts: left, middle and right. Each is labelled to avoid confusion and ensure correct directional placement. All three mount via M4 screws, meaning it just takes a standard 3mm Hex Key to install. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eCanon-Compatible\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003e\u003cspan class=\"ShortCopy\"\u003eFor Canon shooters wanting the versatility of DJI gimbals, this Riser is the ideal solution. It is compatible with a range of Canon cinema cameras such as the C70, C80, C200, C300 Mk III, C400, C500 Mk II and C700. This bridges the gap between your Canon camera, DJI gimbals and our LeftField Mini Baseplate: creating a consistent and convenient rigging setup. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eQuick-Release\u003c\/p\u003e\n\u003cp\u003eOnce installed, you can just as easily uninstall your DJI dovetail. The orange easy-press safety linking the right and middle parts of the Riser help keep the dovetail in place when you need it, but give you an easily-accessed quick-release button.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003ePart of the LeftField System\u003c\/p\u003e\n\u003cp\u003eThe LeftField system of quick-release baseplates are the most convenient mounting option for professional filmmakers. Our patented Open•UP system allows you to cleanly mount your camera rig to any ARRI standard dovetail in moments, and release it just as quickly.\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56122981253446,"sku":"B4005.1046","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4005_1046-DJI-Riser-Mount-for-LeftField-Mini_05_web.png?v=1772898071"},{"product_id":"dji-riser-shim-46-5mm-49-5mm","title":"DJI Riser Shim (46.5-49.5mm)","description":"\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/RoK76M48ssc\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003cspan data-mce-type=\"bookmark\" style=\"display: inline-block; width: 0px; overflow: hidden; line-height: 0;\" class=\"mce_SELRES_start\"\u003e\u003c\/span\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eElevate your camera setup with the DJI Riser Shim for \u003cstrong\u003e\u003cu\u003eLeftField Mini Baseplates\u003c\/u\u003e\u003c\/strong\u003e: designed to elevate cameras to the correct height for gimbal shooting. Sitting between the LeftField Mini and DJI RS Receiver, the Riser Shim mounts cleanly and is intuitively designed to give the proper height clearance to cameras with low optical centres – see the “Compatibility” section below for a full list of compatible cameras.\u003c\/p\u003e\n\u003cp\u003eLightweight and wear-resistant, the 46.5mm-49.5mm Riser Shim is essential for compact shooting.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eDesigned for LeftField Mini\u003c\/p\u003e\n\u003cp\u003eWant to mount more compact cameras to a DJI gimbal? Use the Riser Shim to set the cameras listed below to the correct height. With the LeftField Mini being a deliberately downsized version of our bestselling LeftField 3 Baseplate, the Riser Shim has been designed to maintain that same minimal form factor.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eCompact Clearance\u003c\/p\u003e\n\u003cp\u003eWith Riser heights, you have approximately 3mm of leeway – which gives our Riser Shim the potential for a broad range of compatibility. For cameras with an optical centre distance of 46mm-50mm, such as the RED KOMODO or KOMODO-X, this Riser Shim is ideal for elevating it on your Baseplate.\u003c\/p\u003e\n\u003cp\u003e(Note: the Shim also factors in the added 14.75mm of height added by the \u003cstrong\u003e\u003cu\u003eUniversal Dovetail\u003c\/u\u003e\u003c\/strong\u003e)\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eEasy Installation\u003c\/p\u003e\n\u003cp\u003eThe Riser Shim mounts to your LeftField Mini’s central channel via four M4 screws, sitting snugly within the baseplate. The three marked screw threads on the corners are for the DJI Receiver: which is also installed with the same M4 screws and just a few turns of a 3mm Hex Key.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003ePart of the LeftField System\u003c\/p\u003e\n\u003cp\u003eThe LeftField system of quick-release baseplates are the most convenient mounting option for professional filmmakers. Our patented Open•UP system allows you to cleanly mount your camera rig to any ARRI standard dovetail in moments, and release it just as quickly.\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56122994753862,"sku":"B4003.1068","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4003_1068-DJI-Riser-Shim-46.5-49.5mm_01_web.png?v=1772898560"},{"product_id":"dji-riser-shim-57mm-60mm","title":"DJI Riser Shim (57-60mm)","description":"\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/RoK76M48ssc\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003cspan data-mce-type=\"bookmark\" style=\"display: inline-block; width: 0px; overflow: hidden; line-height: 0;\" class=\"mce_SELRES_start\"\u003e\u003c\/span\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eElevate your camera setup with the DJI Riser Shim for \u003cu\u003eLeftField Mini Baseplates\u003c\/u\u003e: designed to elevate cameras to the correct height for gimbal shooting. Sitting between the LeftField Mini and DJI RS Receiver, the Riser Shim mounts cleanly and is intuitively designed to give the proper height clearance to cameras with low optical centres – see the “Compatibility” section below for a full list of compatible cameras.\u003c\/p\u003e\n\u003cp\u003eLightweight and wear-resistant, the 57mm-60mm Riser Shim is essential for compact shooting.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eDesigned for LeftField Mini\u003c\/p\u003e\n\u003cp\u003eWant to mount more compact cameras to a DJI gimbal? Use the Riser Shim to set the cameras listed below to the correct height. With the LeftField Mini being a deliberately downsized version of our bestselling LeftField 3 Baseplate, the Riser Shim has been designed to maintain that same minimal form factor.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eCompact Clearance\u003c\/p\u003e\n\u003cp\u003eWith Riser heights, you have approximately 3mm of leeway – which gives our Riser Shim the potential for a broad range of compatibility. For cameras with an optical centre distance of 72mm and 74mm, such as the Sony VENICE Extension System Mini (E-Mount), this Riser Shim is ideal for elevating it on your Baseplate.\u003c\/p\u003e\n\u003cp\u003e(Note: the Shim also factors in the added 14.75mm of height added by the \u003cu\u003eUniversal Dovetail\u003c\/u\u003e)\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eEasy Installation\u003c\/p\u003e\n\u003cp\u003eThe Riser Shim mounts to your LeftField Mini’s central channel via four M4 screws, sitting snugly within the baseplate. The three marked screw threads on the corners are for the DJI Receiver: which is also installed with the same M4 screws and just a few turns of a 3mm Hex Key.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003ePart of the LeftField System\u003c\/p\u003e\n\u003cp\u003eThe LeftField system of quick-release baseplates are the most convenient mounting option for professional filmmakers. Our patented Open•UP system allows you to cleanly mount your camera rig to any ARRI standard dovetail in moments, and release it just as quickly.\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56122994852166,"sku":"B4003.1069","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4003_1069-DJI-Riser-Shim-57-60mm_01_web.png?v=1772898571"},{"product_id":"dji-riser-shim-52-5mm-55-5mm","title":"DJI Riser Shim (52.5-55.5mm)","description":"\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/RoK76M48ssc\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003cspan data-mce-type=\"bookmark\" style=\"display: inline-block; width: 0px; overflow: hidden; line-height: 0;\" class=\"mce_SELRES_start\"\u003e\u003c\/span\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eElevate your camera setup with the DJI Riser Shim for LeftField Mini Baseplates: designed to elevate cameras to the correct height for gimbal shooting. Sitting between the LeftField Mini and \u003cu\u003eDJI RS Receiver\u003c\/u\u003e, the Riser Shim mounts cleanly and is intuitively designed to give the proper height clearance to cameras with low optical centres – see the “Compatibility” section below for a full list of compatible cameras.\u003c\/p\u003e\n\u003cp\u003eLightweight and wear-resistant, the 52.5-55.5mm Riser Shim is essential for compact shooting.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eDesigned for LeftField Mini\u003c\/p\u003e\n\u003cp\u003eWant to mount more compact cameras to a DJI gimbal? Use the Riser Shim to set the cameras listed below to the correct height. With the LeftField Mini being a deliberately downsized version of our bestselling LeftField 3 Baseplate, the Riser Shim has been designed to maintain that same minimal form factor.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eCompact Clearance\u003c\/p\u003e\n\u003cp\u003eWith Riser heights, you have approximately 3mm of leeway – which gives our Riser Shim the potential for a broad range of compatibility. For cameras with an optical centre distance of 52mm-55mm, such as the RED V-RAPTOR and V-RAPTOR X, this Riser Shim is ideal for elevating it on your Baseplate.\u003c\/p\u003e\n\u003cp\u003e(Note: the Shim also factors in the added 14.75mm of height added by the \u003cu\u003eUniversal Dovetail\u003c\/u\u003e)\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003eEasy Installation\u003c\/p\u003e\n\u003cp\u003eThe Riser Shim mounts to your LeftField Mini’s central channel via four M4 screws, sitting snugly within the baseplate. The three marked screw threads on the corners are for the DJI Receiver: which is also installed with the same M4 screws and just a few turns of a 3mm Hex Key.\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003ePart of the LeftField System\u003c\/p\u003e\n\u003cp\u003eThe LeftField system of quick-release baseplates are the most convenient mounting option for professional filmmakers. Our patented Open•UP system allows you to cleanly mount your camera rig to any ARRI standard dovetail in moments, and release it just as quickly.\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56122994950470,"sku":"B4003.1067","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4003_1067-DJI-Riser-Shim-52.5-55mm_01_web.png?v=1772898583"},{"product_id":"arca-receiver-mk-ii","title":"Arca Receiver Mk II","description":"\u003cp class=\"productcopy\"\u003e\u003cspan class=\"ShortCopy\"\u003e\u003cspan style=\"font-family: 'ABC Favorit Variable Unlicensed',sans-serif; mso-bidi-font-family: 'Times New Roman'; mso-bidi-theme-font: minor-bidi;\"\u003eAdd quick-release convenience to your \u003cb\u003e\u003cu\u003eUniversal Dovetail\u003c\/u\u003e\u003c\/b\u003e with the Arca Receiver. Accommodating any standard Arca plate, the Receiver is ideal for quickly making adjustments to your camera without cumbersome screws. The removeable safety stop and stainless steel locking lever ensure that your plates don’t come loose. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003e\u003cspan class=\"ShortCopy\"\u003e\u003cspan style=\"font-family: 'ABC Favorit Variable Unlicensed',sans-serif; mso-bidi-font-family: 'Times New Roman'; mso-bidi-theme-font: minor-bidi;\"\u003eWith an integrated spirit level, the Arca Receiver is easy to use and ideal for low-profile rigs. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"Subheading\" style=\"margin-left: 0cm;\"\u003e\u003cspan class=\"ShortCopy\"\u003e\u003cspan lang=\"EN-US\" style=\"font-family: 'ABC Favorit Variable Unlicensed',sans-serif; mso-bidi-font-family: MinionPro-Regular;\"\u003eArca-Compatible\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003e\u003cspan class=\"ShortCopy\"\u003e\u003cspan style=\"font-family: 'ABC Favorit Variable Unlicensed',sans-serif; mso-bidi-font-family: 'Times New Roman'; mso-bidi-theme-font: minor-bidi;\"\u003eThe Arca Receiver allows you to use any standard-issue Arca plate: conveniently mounting it onto your Universal Dovetail. The ergonomic lever adds an extra layer of quick-release: letting you make micro-adjustments to the camera without completely redesigning the rig.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan class=\"ShortCopy\"\u003e\u003cspan lang=\"EN-US\" style=\"font-family: 'ABC Favorit Variable Unlicensed',sans-serif; mso-bidi-font-family: 'Times New Roman'; mso-bidi-theme-font: minor-bidi;\"\u003eNew Heights\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003e\u003cspan class=\"ShortCopy\"\u003e\u003cspan style=\"font-family: 'ABC Favorit Variable Unlicensed',sans-serif; mso-bidi-font-family: 'Times New Roman'; mso-bidi-theme-font: minor-bidi;\"\u003eThe problem with small cameras and large lenses is that they are tough to mount: with lens mounts so low on the camera body, lenses can scrape against dovetail plates. This is where the Arca Receiver comes in, adding an effective 8mm of height required to give your lenses clearance. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan class=\"ShortCopy\"\u003e\u003cspan lang=\"EN-US\" style=\"font-family: 'ABC Favorit Variable Unlicensed',sans-serif; mso-bidi-font-family: 'Times New Roman'; mso-bidi-theme-font: minor-bidi;\"\u003eLevelled Up\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003e\u003cspan class=\"ShortCopy\"\u003e\u003cspan style=\"font-family: 'ABC Favorit Variable Unlicensed',sans-serif; mso-bidi-font-family: 'Times New Roman'; mso-bidi-theme-font: minor-bidi;\"\u003eOnce installed in the Universal Dovetail’s long central channel, you can slide the Arca Receiver back-and-forth to optimally balance your build. With 77mm of travel potential, even the bulkiest of zooms or the primmest primes can be levelled out. Factor in the built-in bubble level, and you can also quickly ensure that your shot is levelled out – preventing any unwanted Dutch angles. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan class=\"ShortCopy\"\u003e\u003cspan lang=\"EN-US\" style=\"font-family: 'ABC Favorit Variable Unlicensed',sans-serif; mso-bidi-font-family: MinionPro-Regular;\"\u003eLocked In\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003e\u003cspan class=\"ShortCopy\"\u003e\u003cspan style=\"font-family: 'ABC Favorit Variable Unlicensed',sans-serif; mso-bidi-font-family: 'Times New Roman'; mso-bidi-theme-font: minor-bidi;\"\u003eOnce you’ve added your compatible Arca plate or \u003cb\u003e\u003cu\u003eArca Riser\u003c\/u\u003e\u003c\/b\u003e, there are two safety mechanisms to ensure that your camera remains in place. A built-in safety stop prevents the plate from coming loose once installed, and the locking lever reinforces that protection. This means that your setup is secure when you need it to be, but easy to unlock when you don’t. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy-sub\"\u003e\u003cspan class=\"ShortCopy\"\u003e\u003cspan lang=\"EN-US\" style=\"font-family: 'ABC Favorit Variable Unlicensed',sans-serif; mso-bidi-font-family: 'Times New Roman'; mso-bidi-theme-font: minor-bidi;\"\u003ePart of the Create System\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"productcopy\"\u003e\u003cspan class=\"ShortCopy\"\u003e\u003cspan style=\"font-family: 'ABC Favorit Variable Unlicensed',sans-serif; mso-bidi-font-family: 'Times New Roman'; mso-bidi-theme-font: minor-bidi;\"\u003eThe Create series of accessories from Bright Tangerine offer accessible and versatile options for filmmakers of any level. Broadly compatible, the Create range provides new ways to customise your camera for varied shooting scenarios. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Bright Tangerine","offers":[{"title":"Default Title","offer_id":56743185350982,"sku":"B4013.1118","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1200\/4678\/files\/B4013_1118-ARCAReceiverMk2_Manfrotto__00_web.png?v=1780912039"}],"url":"https:\/\/brighttangerine.com\/collections\/riser-adaptor-blocks.oembed","provider":"Bright Tangerine","version":"1.0","type":"link"}