Search Results for:
Titan Arm 2 Adaptor (3/8″-16)
$7
The Titan Arm 2 Adaptor (3/8”) provides a 3/8” screw for either end of the Titan Arm 2’s ball-and-socket joints. It installs cleanly via a single screw and can be swapped out for alternatives including 1/4″, NATO or an anti-twist thumbscrew.
- 3/8” Screw – Attach the Titan Arm to any standard 3/8”-16 screw thread.
- Quick Installation – The 3/8” Adaptor is easily installed with a 2.5mm Hex Key.
- Interchangeable – Swap the Adaptor for alternative mounts in moments.
- Durable – The stainless steel build means that the Adaptor won’t strip out or rust.
- For Either End – The 3/8” Adaptor can be mounted to either end of the Titan Arm 2.
In stock
Description
Simple yet effective, our standard Titan Arm 2 3/8” Adaptor allows you to attach the Titan Arm to any standard 3/8”-16 screw thread. Cleanly installed with a single screw – and just as easily uninstalled – the Adaptor is easy to use.
With a stainless steel build that won’t rust or corrode, set yourself up for life with this Titan Arm 2 Adaptor.
3/8” Mounting
This Titan Arm 2 Anti-Twist Adaptor provides a convenient 3/8”-16 mounting point for either end of your monitor arm – making it compatible with any corresponding screw thread. Found on everything from camera bases to cheese plates, this gives you freedom of mounting to or from whatever you need.
Simple Installation
The Adaptor installs via a single M4 screw to the Titan Arm, with just a few twists of a 2.5mm Hex Key. The countersunk screw thread keeps the form factor of the adaptor discreet, for clean rigging.
Interchangeable
With the Titan Arm 2, the possibilities are endless. The Adaptor can be swapped out for a 1/4″-20 or NATO option at either end (or the Anti-Twist 3/8” Adaptor for added security) meaning that you can attach your monitor arm to any standard-issue mounting thread.
Part of the Titan Arm System
The future is here: the Titan Arm 2 from Bright Tangerine is the most versatile monitor arm for filmmakers. With interchangeable ends for full compatibility with industry-standard rigs. High-strength and light weight, the Titan Arm 2 is the best monitor arm for your setup.
Instructions/Assembly
The Adaptor requires a 2.5mm Hex Key in order to install.
Adaptor to Titan Arm
1. Align the base of the Adaptor with the ball-and-socket joint of the Titan Arm. Lower it into place so that the countersunk M4 screw threads are aligned.
2. Insert the M4 screw through the Adaptor and use a 2.5mm Hex Key to secure it in place.
Compatibility
The Titan Arm 2 Adaptor is designed to fit onto the ball-and-socket joints of the Titan Arm 2, with a 3/8”-16 screw at the other end which can mount to any standard 3/8” thread.
Please note that this adaptor does not feature anti-twist in any format, but it can be found into the Titan Arm 2 Anti-Twist Adaptor (3/8”).
The M4 screw required to secure the Adaptor to the Titan Arm is 8mm in length, whilst the screw for the Anti-Twist variants is 10mm in length and the NATO Adaptor’s is 12mm in length.
Zero Compromises
Based in the UK, Bright Tangerine’s products are designed and manufactured to the highest standards of quality. Built as practical solutions to filmmaking problems, each accessory is tested rigorously to meet the standards of some of the largest productions in the world. Our customer service team offers unparalleled support for all of our products, and can help advise or assist on a range of matters.
Warranty
24 months
Additional information
| Weight | 0.020 kg |
|---|---|
| Dimensions | 1.6 × 1.3 × 2.2 cm |
| Camera Brand | |
| Camera Model | |
| Range |
