Search Results for:
HDMI Clamp for Canon C70 and C80
$47
The HDMI Clamp for Canon C70 and C80 holds HDMI cables in place when attached to the Canon C70 or C80. It is adjustable to match different cable shapes and sizes and is rated to withstand over 30kg of force.
With an anti-twist design made from anodised aluminium, the HDMI Clamp is lightweight yet high-strength.
- Secure – The HDMI Clamp helps ensure a stable hold on your cables.
- Canon Compatible – The Clamp works with both the Canon C70 and C80.
- High Strength Capacity – The HDMI Clamp is resistant to more than 30kg of force.
- Adjustable – Different plug sizes up to 10mm thick can be made to fit the HDMI Clamp.
- Repositionable – Align the Clamp for optimum cable positioning.
In stock
Description
Nothing is more frustrating than loss-of-signal mid-take, which is why our HDMI Clamp for Canon C70 and C80 is such a valuable tool. Fully adjustable to suit any cable size or placement, the HDMI clamp helps secure your connection – with a strength capacity of more than 30kg.
Made from aerospace-grade aluminium, the HDMI Clamp is both lightweight and high-strength.
Shoot Without Interruption
The HDMI Clamp ensures that your cable won’t come loose, no matter its size. You can fine-tune the clamp to suit your choice of cable, accommodating plugs up to 10mm (0.4”) thick. You can also position the clamp in fore or aft configurations, to avoid twisting the cable.
C70 and C80 Compatible
The HDMI Clamp works with both the Canon C70 and the newer C80, fitting to either our C70 Side Plate or the C80 Side Rib. The Clamp mounts cleanly and simply via a single sliding screw channel – marked “HDMI Clamp” on either plate.
High-Strength
The HDMI Clamp is made from aerospace-grade aluminium, for the ultimate balance of strength and weight. This allows the Clamp to withstand over 30kg of force without issue. Coupled with the grooved slot that prevents the HDMI plug from twisting, and you can shoot with confidence that your cable won’t come loose.
Part of the Canon System
Bright Tangerine’s range of Canon accessories provide new customisation options for your camera. Durable and dependable, each addition to your camera system adds new features or freedom to shoot however you need – from run-and-gun videography to cinematic narratives.
Instructions/Assembly
The HDMI Clamp for Canon C70 and C80 comes with the required screws and components, but requires a 2mm and 3mm Hex Key in order to install.
Clamp to Side Plate or Side Rib
1. Align the HDMI Clamp screw with the marked channel on the C70 Side Plate or C80 Side Rib.
2. Use a 3mm Hex Key to install the mounting screw – leaving it slightly loose for fine-tuned adjustment.
Cable to Clamp
1. Install the HDMI Cable whilst the Clamp is loose – it is important to do this before tightening.
2. Slide the HDMI Clamp until it is aligned correctly with the plug.
3. Secure the Clamp in place with the 3mm Hex Key.
4. Use a 2mm Hex Key to loosen the internal Clamp Adjustment screw on the other side of the HDMI Clamp to tighten onto the HDMI plug.
5. Tighten until the HDMI cable is secure in place (do not over-tighten).
Compatibility
The HDMI Clamp can be used with any HDMI cable with a plug thickness as wide as 10mm (0.4”). It is compatible with both the Canon C70 and C80, mounting via their respective Side Ribs.
Zero Compromises
From the heart of the UK, Bright Tangerine creates camera accessories to the utmost standards of quality. From Hollywood blockbusters to short-form content creation, our products are trusted by filmmakers around the world. Our dedicated customer service team can assist and advise on any purchases, and help you make the most out of your camera.
Additional information
| Weight | 0.016 kg |
|---|---|
| Dimensions | 5.6 × 2.99 × 0.9 cm |
| Camera Brand | |
| Camera Model |
